How to flash the phone "Android" Samsung through Odin?

Users of Samsung smartphones based on the Android operating system often face a problem when the phone starts to "buggy" and hang. Such problems usually arise from the installation of unlicensed and third-party software that helps to "kill" the system. In some cases, the smartphone starts to live its life due to viruses that can get to the device from third-party media (flash cards and computers) and when connecting to the Internet.

The best solution to the situation will be the flashing of the smartphone. But official service centers most often refuse warranty service (and have the full right to do so), while demanding payment for work. Since the service is not cheap, many users can independently try to return the smartphone to life. This article will provide information on how to flash the phone through Odin, the most popular official firmware update program.

Beginning of work

The first step on the road to success in a difficult matter is preparing for the process. You need to make sure that the battery of the smartphone is charged at least 80 percent (better if the battery is full). Also, to understand how to flash through Odin, you need to download the program to your personal computer. At the same time, the operating system installed on the PC must be at least Windows XP.

You will definitely need the firmware itself (it can be single-file or multi-file), and ADB drivers, which can be downloaded on specialized sites. As soon as it becomes clear that all conditions are met, you can begin the process.

Installing drivers

One of the key points that you need to perform before you patch through Odin is installing the necessary drivers for your smartphone. All you need to do is download the installer and run it (preferably on behalf of the administrator).

There are times when drivers are already installed on the PC. To make sure that everything goes properly, you should check the system for older versions. If you find out-of-date drivers, you should remove them and install the latest ones.

Downloading your smartphone to Downloading mode

How to flash Samsung through Odin? Easily! The first thing to do directly with the smartphone is to launch it in the Downloading mode. But before this it is worth making sure that all the necessary information from the smartphone was saved before the firmware, since after it the device will turn on "as new" and there will not be any information on it.

If the device does not turn on, do not despair. With the gadget turned off, you must hold the Volume, Home, and On / Off buttons together. As soon as the screen lights up, please confirm the action, you need to click the "Volume +" button. After that, the image of the robot-android and the inscription Downloading will appear on the screen. We connect the smartphone via a USB cable to the PC, and the necessary actions are performed on the smartphone.

First launch of Odin

Here comes the time of the firmware process. This should be approached with great responsibility and re-read all the instructions. In the event that something goes wrong, you can get a so-called "brick", and the restoration of the smartphone will cost a lot of money, or it will be completely impossible.

Therefore, before flashing through Odin, you need to understand the program itself. To do this, first unpack the archive directly from Odin to any convenient location on the hard disk, and then run the Odin.exe file. So, in the interface menu you can see a lot of strange buttons and words. But do not be scared. In order to learn how to flash through Odin, you only need knowledge of what firmware is available.

How to flash the "Android" via Odin

If the firmware consists of only one file, all you need to do is click on the PDA button and in the opened window select the location of the same firmware file.

Otherwise, having the firmware of the three files, you should select the largest file in the PDA line (it contains the word CODE), in the PHONE line - the file containing the word PHONE in the title, in the line CSC - respectively, the file with the keyword CSC.

After these manipulations, make sure that opposite the Auto Reboot and F. Reset Time are ticked. It is necessary to remember that in front of the words Re-Partition in no case should there be a tick, as this can turn the device into a "brick"!

Other lines and ticks are needed for more advanced users and those who are developing so-called custom versions of firmware for smartphones, so the best solution is not to experiment with the above functions. Next, you need to click on the Start button, and the process of the firmware will begin immediately.

During firmware

In the process of firmware you need to make sure that the PC will not turn off and will not hang, as this can lead to disastrous consequences for the smartphone. Also, you can not disconnect the USB cable and press any buttons.

Just? It turns out that yes. After all, in order to understand how to flash through Odin Samsung smartphone, you do not need any special skills and knowledge. The most important thing is to make sure that the firmware process has reached its final stage, and the download bar has passed all 100%. After that, the smartphone will reboot itself and turn on in the setup mode, as if it was first unpacked and launched.

With the correct step-by-step configuration, the phone will boot up in normal mode and start to function freely. The entire file system will be updated, there will not be any data from the previous firmware. Therefore, once again, you should pay attention to the point, which refers to the preservation of files on any convenient media before the firmware process.

In general, I want to say that almost everyone will be able to cope with the task. But if there is no confidence in the skills of working with a PC and a smartphone, then it's better not to risk it. In such cases, it is often more profitable to turn to specialists and get a 100% positive result. Therefore, before you flash through Odin Samsung smartphone on the "Android", it is necessary to decide whether there is a willingness to experiment with such manipulations.

The most important thing is to be confident in yourself and in your abilities, and the rest should be left to complex computational processes performed by a personal computer, operating system and software.