How to distribute WiFi from a computer: step by step guide

It is not always possible to purchase a wireless router, and in such cases the question arises: "How to distribute WiFi from a computer?". After all, built-in and external network cards of this standard are capable of both receiving information and giving it away. This means that such a device can successfully replace a router. The only downside is the need to keep the PC on when it's on to access the wireless network. But in order for the adapter to work in this mode, you need a special software. In this case, it's the Connectify utility.

Wires

Before you distribute from the computer WiFi, you need to connect everything correctly. To do this, in the off state, the wires from the provider are connected to the socket of the network card. If an external wireless adapter is used, then it is also connected to the rectangular port of the USB interface. It is better to use those that are located on the back of the system unit. They are soldered directly to the motherboard and are definitely included. But on the other hand, you can connect only if there is 100% certainty in their work. Next you need to turn on the PC. After the download is complete, a message will appear stating that new equipment has been found. Then should appear information that either the driver is installed successfully, or it did not turn out to find the required software. But in any case, it's best to install them from a CD and force the computer to reboot.

Customize

Before you distribute from the computer WiFi, you need to properly configure it. To do this, you now need to install a special software - Connectify. To begin, download its installation version (the one that goes without the "PRO" index - it's free) from the Internet. Then install it, following the instructions of the wizard. At the next stage it needs to be started. In the opened window enter the network name, the password for access and the data source - a wired connection. Then, to start the virtual router , click on the "Start" button.

Connect external devices

Before you distribute from the computer WiFi, you need to connect external devices: tablets, smartphones, laptops and stationary PCs. First, let's look at the ones that work under the OS "Android". First you need to go to the following address "Applications \ Settings \ Wireless Networks". Here, without fail, you need to enable WiFi. Then we return to the applications and find the utility for searching wireless networks. We run it and find all available networks. Select the name in the list that was set earlier. After clicking on it, a window for entering the password will appear. We enter it. After receiving the network address, the WiFi logo will appear on top, then you can go online.

And now find out how to distribute WiFi through a computer to a laptop, for example. And then everything is much simpler. It is enough to open the network management center (make a click on its icon in the lower right corner of the monitor). In the opened list, we select our network in the same way and connect to it. In this case, you will need to enter a password to gain access.

Results

Within the framework of this article, an answer was given to the question: "Can a computer give out WiFi?". And he is definitely positive. There is a hardware capability for this. It remains to install a special software and configure it properly. And nothing complicated in this, and with this task can easily cope with each.