Dimensions of corner sinks for the kitchen. Small corner kitchen sinks

In the kitchen, the housewives spend a considerable part of their time. 70 percent of it they work near the sink. Therefore, it must be convenient and reliable. What model is better to choose, so that it was beautiful, comfortable, served for a long time? What sizes of corner kitchen sinks for a kitchen are suitable for a small room?

Requirements

Aesthetic washing is very important for creating a good mood of the hostess. Who can create a delicious dish near the old peeling?

Hence it follows that the washing should be strong and reliable, do not react to the effects of hot water, chemicals. Caring for her should be easy.

It is desirable that the sink could hold a lot of dishes, and at the same time did not take up much space. It is not easy to reconcile these mutually exclusive requirements. It is for this purpose that the corner sink is designed.

What you need to consider

In addition to the above requirements, it should naturally fit into the interior. This largely depends on the size of the corner sinks for the kitchen. After all, different options for combining devices are possible. Before buying decide what additional elements will be present: for example, a filter or a shredder with a corner kitchen sink. The dimensions also depend on the location of the mixer. If it is not placed very tightly against the wall, detergents can be placed in the empty space.

Determined with the presence of additional bowls (for rinsing, defrosting products) and drying for dishes - a space where you can put washed objects to make them glass water.

Angle washers

Usually they are used for accommodation in small kitchens. After all, every square centimeter of the square is important there. But in a large room with their help you can solve some problems, for example, fill an empty corner.

Will help imagine how it saves the square any corner sink for the kitchen, photo. Its dimensions are dictated by the presence of a free area. Often they are designed so that the bowl of the sink is in the corner. On both sides of it are placed surfaces on which you can put both dirty and clean dishes. In this case, there may be more places than with the usual location of the sink.

A cut at the corner near the bowl will make it easy to approach it.

The area under the sink is used to store a variety of equipment such as a broom or a trash can.

When choosing a corner wash, pay attention to:

• Dimensions of corner sinks for the kitchen.
• Shape, the depth of the bowl.
• Material.

The depth of the bowl is of great importance for convenient work. Experts consider the deep depth to be 16-20 cm.

Dimensions of small washes

Choosing the size of corner kitchen sinks and considering the possibility of their installation, take into account the presence of nearby points of descent into the sewerage and water supply. Here it may turn out that it is easier to attach the sink to the sewer pipe. After all, the distance from it to the sink will be less than that of the shallow one.

For a small cramped room, a corner sink with one bowl with a diameter of 40 cm is suitable. You can find small with two sections. Bowls can be near or at an angle.

If the house has a dishwasher, then a large sink is not needed. But that's just where to put it in a small kitchen?

The form

The variety of forms of modern washes can amaze the imagination of any mistress. So do not rush to buy the first one. Usually bowls are rectangular, square, round. The latter often turn out to be more spacious than those of a square of the same radius. There are oval and even triangular. When choosing, see which form is more in line with the style of furniture in your kitchen.

The shape of the sink itself depends on the number of bowls. Usually, in the presence of three containers, a small defrosting bowl is placed between the large ones. Such washes are appropriate in large kitchens. They give complete freedom to the hostess. But the price of such washers is higher.

For small kitchens, a round bowl fits well. She will fit perfectly into the corner. If the sink has 2 bowls, then an interesting option is a rectangular and triangular or round with an oval connection. Washing, where there is a large and small bowl, is called a one and a half. Now you can find variants with three very small containers of different shapes.

A siphon and a pipe for draining water should be added to each bowl. The more of them, the less space will remain under the sink.

Types of sinks

Overheads are convenient because they are simply worn on an existing curb, which does not require special effort and cost. What should be more: a curbstone or a corner sink for the kitchen? The dimensions of the cabinet should correspond to the size of the sink. Its edges usually overlap the junction, but it sits tight. Standard dimensions of the cabinet: width 50 or 60 cm, length 50, 60, 80 cm.

Mortise is harder to install. To do this, you need an appropriate tool and specific skills. All cuts and joints are carefully sealed. Mortise sinks are installed flush with the countertop. This helps keep the workplace clean. They look beautiful, that's why they are very popular.

The under-sink is installed with brackets in the stone countertops. Its vertical walls form one plane with sections of the sink. Do it yourself will not succeed. Do not mount the sink in the material that imitates the tree. After all, the water will fall into the place of the frame. This will lead to rapid swelling and delamination of the countertop.

Often install corner cupboards under the sink for the kitchen. The dimensions of the sink must be at least 5 cm less than the width of the cabinet. This is due to the fact that it should not be located very close to the wall. There are recommendations for the distance from the front edge of the table top to the bowl. It is desirable that it was not less than 5 cm, so that the spray did not fly to the landlady.

But will such a kitchen sink built into the corner cabinet be convenient? The dimensions of a small sink are inversely proportional to its depth.

When installing the corner structure, you first need to buy a sink, then pick up the countertop and furniture.

Material

Stainless steel sinks are very practical. Do not be afraid that the enamel will break away, and a dark stain will appear, as it happens with enameled. They have an attractive appearance. Drying usually has a ribbed surface so that water does not linger under the dishes and drains into the sink. In addition, it is arranged so that water does not flow over the edges. In a set with a stainless steel sink, there is usually a decorative plug made of the same material. It allows you to close unnecessary holes, if any. After all, sometimes the cranes go straight out of the wall, without going through the sink.

Depending on the location of the valve, the hole for it can be on the right, left, or center of the structure. This expands the possibilities of its connection to the finished water supply.

But they also have disadvantages. First of all, this is a strong noise, issued by water when it hits the bottom. But we learned to fight with this. Use stainless steel thicker. On the bottom of the back side attach a soft pad-sound absorber.

Of course, the quality of the material can be different. Usually it is a type 18/10 steel. This is reflected, first of all, on the price. And sometimes it turns out that this is not stainless steel at all. In order not to be deceived, use a simple method. Apply a magnet to the sink. If he sticks, then it's not a real stainless steel.

Ceramic

The advantage of sink porcelain sinks is the appearance, scratch resistance. They are not afraid of hot water. The coating of glaze, often colorful, attracts the buyer. He forgets that such washers are fragile enough. A violation of the integrity of the glaze will lead to their darkening. Therefore it is better to install a sink from porcelain tiles. It is much more reliable.

Composite

They are made from stone crumbs, adding acrylic resin to it. It is corian and silikril. Strong and beautiful products of various colors are obtained, which are not afraid of mechanical action, hot water, or chemicals.

The sound of water is absorbed by the surface of the sink. It is from this material that small corner kitchen sinks are often created. Their dimensions are small, and the price is high because of the cost of the material.