How to properly lubricate plastic skis: tips and tricks

Skiing is a useful and interesting activity for the whole family. But skis are not enough to buy, they need competent care, including lubrication. Lubrication of sports equipment made of plastic differs from the same process with wood. This article is devoted to how to properly lubricate plastic skis.

Greasing of skis "on sliding"

The technology of lubricating skis from plastic is different depending on how you are going to ride. In order for the skis to slide, they are smeared with hot paraffin, and for keeping in the snow - a special ointment. How to smear plastic skis for better slip?

1. Apply the melted paraffin to the surface of the skis with droplets (so that a path is formed). Align the path with a hot iron, but make sure that the paraffin does not smoke. The temperature of the iron should not exceed 150 ° C.
2. Wait for about 20 minutes until the skis are completely cooled and proceed to remove the paraffin layer. For this purpose use a scraper
3. Then take a nylon brush and treat the surface several times (the direction of movement - from toe to heel)
4. If you want to use aerosol accelerators, then apply them directly on the street a few minutes before the trip. If there is a plus temperature in the street, or if the snow is old and loose, use knurls.

How to lubricate plastic skis "on holding"

The technology of ski lubrication "on holding" differs from that described above. In order for the skis to have a more tight grip on the snow cover, they are lubricated like this:

• Place the skis on a solid, clean plane, with the working surface up. Before greasing, treat the surface with sandpaper.
• Apply a special ski ointment on the surface and walk on it with iron (the temperature is again no higher than 150 ° C). Cool the skis.
• Align the remaining ointment with a stopper (you can use special equipment or the usual plug from champagne). If necessary, apply the ointment again, but now do not use the iron, but simply rub it with a cork again.

Ointments for skis

How correctly to lubricate plastic skis, you have already learned, but what for this purpose to use ointment? Means for the treatment of skis are ordinary, low-fluoride and high-fluoride. The usual ointment will work if the humidity during skating does not exceed 55%. In other cases, it is better to use products containing fluoride in one or another quantity. Such ointments are more expensive, but the skis after sliding are much better. Be aware that if the temperature of the ironing exceeds the intended limit, harmful substances will be released from the ointment with fluorine content . Lubricate the equipment in a respirator or in a well-ventilated area. If you are asking the question "how to lubricate plastic skis", then go straight to the sports equipment store, where sales consultants will pick up the ointment that suits you.

How to properly lubricate plastic skis: important tips

Even the best quality ointment will not bring your skis in order if you are not familiar with the basic rules of lubrication:

• Apply grease only at room temperature. Skis in this case must be necessarily clean and dry.
• If you use a solid ointment, always apply it in several layers. And each layer should be raster apart, and the skis after the procedure are cooled. If the temperature outside the window is down to -15 ° C, then 15 minutes will suffice for cooling, if the window is frosty, cool the skis longer.
• How to properly lubricate plastic skis? For classic riding, put ointment or paraffin on the front and back of the skis, surface in the middle, treat the composition for holding on snow.

Do you want to understand if you have smeared the inventory correctly? Take a ski trip of at least a couple of kilometers. How to lubricate plastic skis in case of failure? If your skis roll too bad, use a harder ointment. If they are too slippery, use a higher temperature ointment.

Secrets of lubricating skis

In order for skating to give you only joy, you must clearly know how to properly lubricate plastic skis. In this case, as in any other, there are tricks and secrets.

Always follow the weather forecast on the day of skiing. If there was sunny weather in the morning, and promised to raise the level of air humidity and fog by lunch, be sure to take an extra bottle of ski ointment with you. This will allow you to adjust the lubricant directly in place. Do not know which ointment for skis to choose? Start a special notebook and write down in it all the nuances of the "behavior" of skis after using this or that tool. This will find the perfect ointment!

Be sure to store the ski ointment out of the reach of children and make sure that no moisture gets into it. Otherwise the tool will simply be spoiled. In the street, close the tube immediately after use.

Proper storage of plastic skis

Careful handling and lubrication is required at least once a year. Of course, professional skiers and people renting equipment in resorts do it much more often. As a rule, this is done after each skating. A typical person who prefers to take a leisurely ski trip on a day off is not necessary.

How to properly lubricate plastic skis, you already understood. And here's how to properly store them? Keep them surely lubricated, connected in two places (at the heel and toe). Place the skis in a dry place with room temperature!