How to choose a stabilizer for the boiler: market overview and manufacturer reviews

In order to provide country estates, private houses and country houses with warmth, property owners make connection of gas boilers, they work, allowing to receive heat energy for a dwelling. Continuity of the boiler will be ensured by uninterrupted power supply, when the oscillations and interference in the voltage are completely eliminated.

The need to use a stabilizer

The stabilizer for the boiler may be needed in places where the quality of electricity is very low. If you do not want to face the failure of boiler equipment, which will shorten the life of the boiler equipment, you should use the above-mentioned element, which allows you to cope with stress problems. The equipment requires high-quality voltage, only then the automation will work properly, otherwise the control card may fail. The stabilizer for the boiler is able to correct the voltage and frequency of the current, which allows the systems to operate without strong overloads, excluding their overheating. This supplement system is a feeding equipment. By means of it, the problem of voltage drop can be solved, this indicates that the problem of uninterrupted heat supply will be solved. If the boiler is connected with a stabilizer, it will operate in an economical mode, which will reduce the cost of electricity.

Market review of stabilizers

If you need a stabilizer for the boiler, then you must first deal with the varieties of these devices, which are thyristor, electromechanical or relay. As the last act electronic, they are deprived of the driving part. In this case, many advantages can be distinguished, among them small dimensions, rapid triggering, low weight, and high resistance to frequent voltage drops. It is worth noting that rapid activation is very important when using a technique that involves the presence of pumps and motors.

However, such devices have their drawbacks, they are expressed in the audibility of clicks that may occur during the switching of the relay ranges. It is impossible not to note the accuracy, which depends on the number of steps or keys of the autotransformer. Accuracy, which is allowed by state standards and is 5%, does not exceed the stabilizer. However, the more windings of the transformer, the higher the accuracy. In this case, you may find that the device is more expensive. Such a stabilizer for the boiler can also differ by flashing the lighting at the moment when the winding is switched.

Overview of electromechanical stabilizers

In the operation of such installations, the voltage supply is corrected by the current collector brush. The main advantages are considerable accuracy, which on average is 3%, the duration of operation of this type of stabilizer, which depends on the quality of the graphite finger of the current collector. Electromechanical devices are resistant to overload and have a fairly impressive voltage range.

The disadvantages of electromechanical devices

If you decide to select the above stabilizer for a gas boiler, you should also know about its drawbacks, among them, it should be emphasized the need to replace the current collector brush after 5 years. These devices can not be used at low temperatures. They are characterized by a low response speed, which is unacceptable for household appliances, in addition, the dust that gets inside is charred. You must be prepared for the fact that the device is characterized by open sparking and buzzing of the motor during the movement of the brush.

Overview of triac devices

If you decide to purchase a stabilizer for a gas boiler, then you can prefer triac devices, which are also called thyristors. They have advantages, which are expressed in high accuracy, excellent speed of operation and quiet, smooth operation. However, one should also take into account the shortcomings, namely the high cost and failure of the board, which requires the replacement or reconfiguration.

Reviews of manufacturers

Having visited the store of the corresponding goods, you can choose a good stabilizer for the boiler. However, according to users, it is important to take into account some parameters, namely electric power, operating voltage range, and voltage limits. Today, stabilizers of the brand "Resanta" are quite widespread. Before buying them, you need to consider what electrical power is consumed by the equipment. Thus, the boiler needs input power in the range from 100 to 200 watts. In view of the fact that this value may be different for certain brands of boilers, it is necessary to clarify the power according to the product certificate.

Manufacturer "calm", as the buyers emphasize, indicates in the passport data the operating voltage range, which is in the range from 210 to 230 volts. Due to the fact that most boilers are single-phase devices that are designed for a standard voltage of 220 volts, only 10% of the deviation will be enough to make the device fail.

If you are thinking about how to choose a stabilizer, you should listen to the advice of the supplier Mateus, which indicates that the voltage fluctuations in the network occur within a day from a low to high. That is why before buying a stabilizer it is important to clarify what is the highest voltage limit. The devices of the said manufacturer, as the users say, ensure the de-energization of the gas boiler when the upper voltage limit is reached.

Varieties of stabilizers by the method of installation

If you want to purchase the best voltage regulator for the boiler, it is recommended to be guided not only by what the manufacturer delivered the product, but also by the way the device is installed. There are two ways of fixing, floor and wall. The latter option is considered more aesthetic, since it is flat in an outboard version. If the device is on the floor or on a stand, it is not always convenient for large sizes. When choosing a stabilizer, you should pay attention to ease of use and its size. Another stabilizer should have the ability to cover the voltage range.

If you are not very versed in the voltage range, it is best to purchase a device with a fairly wide range of voltage changes, this will prevent the burnout of both the stabilizer itself and the boiler equipment. Consumers note that the stabilizer 220V must be characterized by a noiseless operation, this will ensure the comfort of its use.

Tips for a specialist to extend the life of the stabilizer

If you have already decided how to choose a stabilizer, then you have to worry about what you need to do in order to extend the life of the stabilizer. As a cause of breakdown, long-term operation at low voltage, which is 170 V and less, can act. However, these devices can have the ability to undergo a sustained load, which is called the capacity. This parameter must be specified in the passport. The stabilizer for the boiler, whose price is 4000 rubles, should remain as long as possible in working order. To do this, it is recommended to monitor the input voltage, it must be done before you connect a large load. Such actions allow to save on repair and purchase of new, more powerful devices for stabilizing the voltage in the network, which is undesirable for the consumer in terms of saving money.